Translate

Monday 12 May 2014

QEG: Official update from Jamie- May 10th

This is the latest update from Jamie about the QEG in Aouchtam Morocco.

.... People need to remember that this is a product in DEVELOPMENT.  All of this was made very clear during the open sourcing and the lead up to all the information being opened to the public.

....... I would also like to add a note that so far that I've seen, out of the over 600 people that donated money to develop the QEG, no one has demanded their money back.  All the people trying to throw rotting fruit at Hope and Val and Jamie over the "donations" and the money questions aren't even the ones that donated money anyway!  And THAT should tell you something.

from sunny Aouchtam....

Love D




**************************************

Hi everyone! We've not had internet for the past couple of days since I promised an update. Here it is from Jamie:

Morocco QEG Build – General Progress Update – Part 1 10-May-2014
From: Jamie
To: All our Amazing Supporters and Followers

As I’m sure everyone is aware, we have had many engineers and technicians here in Morocco working on the QEG with us in the last 3 weeks. Of particular note are the guys from Germany and the German speaking countries, Holland, UK, Canada, and Slovenia. Thanks to these dedicated individuals for their time, effort, and support, spiritually as well as technically… And thanks also to all the amazing and selfless people who brought us parts for the QEG in their suitcases and carry-ons without regard for risk involved. All have contributed to this endeavor, and all are greatly appreciated!

I must personally apologize to all for not publishing more material and more of my own comments on progress etc., to date. It has been a struggle to keep the build and the development process moving forward due mostly to difficulty sourcing parts here, and researching design questions. There has been little choice but to just keep working and try to catch up with your questions, comments and communication whenever internet/phone are available (which is only about 3% of the time in Aouchtam). The engineers and residents here have just made some improvements with the internet hardware, so we’re expecting communications to be a bit better now going forward. And hopefully this update will clear up most of the technical concerns and lack of documentation.

I’m sure the question in everyone’s mind is: How close are we to overunity? Well, here in Morocco, we are very close, within about 200 Watts (800 Watts out for 1000 Watts in at this point in development). We have heard yesterday and today that (2) other groups have completed the basic QEG build, and have resonance. This is good news, since the more people we have working on the development, the faster we will reach our goal.

In the last few days, several negative posts and comments have been circulating about what we are doing here. This is astonishing to us! Apparently some groups and individuals were expecting a completely finished product to be delivered into their hands, with nothing left to do. We have always said that as soon as we got the basic resonance from the machine, we would open source all the information we had, and that’s what we’ve done. The intent was to co-develop the machine in an open source platform, with input, comments, test data, solutions and suggestions shared transparently between all groups that have chosen to build the machine.

Continuing in that spirit, here is a snapshot of our current status…
As we’ve said before, after the mechanical build, it’s not too difficult to get the machine into resonance, since it is a variable frequency generator. We were instructed (by WITTS) to ’match’ the electrical resonance (‘tank’ circuit resonant frequency), with the mechanical resonance (self-resonant frequency of the steel core) which was stated to be around 400 Hz. It was also stated that type M21 steel should be used for the core (however, M21 has been obsolete for many years), and that type M19 could also be used, but the resonant frequency would be lower. It was stated that a ‘harmonic’ could be used, such as 200 Hz, and that would work also. We decided to look for a peak power point (fundamental resonant frequency) between 1733 RPM (116 Hz output frequency) and 3008 RPM (200 Hz output), as this seemed a reasonable speed range for the mechanical setup (Witts’ machine is running about 2450 RPM in the latest video).

We arranged a test using small increments of capacitance (about 7 nF each) starting at the low RPM end (about 1733 RPM, with C of 332 nF). We did 45 iterations, in order of increasing frequency, with the input power fixed at 700 watts. The target was to plot output power against input power to try to develop a bell curve showing a peak resonant frequency. After 43 iterations, we went back to the first C/RPM value to verify it had not changed, and added one more iteration at an extra-low frequency (1727 Hz = 115Hz output frequency). We also did one shot with the input power fixed at 900 Watts (see attached tabbed spreadsheet “QEG Resonance Plot.xlsx”).

As can be seen from the data, the expected trend did not really emerge from this test. The curve is quite flat (no curve) in the targeted speed range, and there is no obvious increase in power. The extreme low RPM end has the best power output and phase lock effect, which also seems to increase linearly as frequency is reduced. However this result doesn’t really fit with the mechanical setup (machine is running too slow) or with expectations from the WITTS instructions. We are currently testing at 3000 RPM (200 Hz) and above, to determine whether or not there is a peak power point in this range (which seems too fast).

It’s possible the 7nF steps we used were too large, but not likely that the peak resonant point would be that sharp. If we do not find a peak in the range of 200 Hz and above, we will assume that the exciter coil must be in place and operational to be able to find the ‘sweet spot’ in tuning the capacitors to the core resonance. We are determined to document and publish the technique necessary to do this ‘etheric’ tuning.

We have also heard from others who have taken the WITTS classes, that an antenna of 20 to 50 feet in length, along with the earth ground(s), are important to bring energy in from the environment, and that the exciter coil can be connected in the primary circuit or the secondary circuit. We will try all possible combinations of these connections, and report our findings in Part 2 of this update.

We are having some preliminary success with the exciter coil wired in series with the primary, at a nominal RPM/C value of 2700/140nF. The output is loaded with 6 100 Watt, 240V incandescent lamps, wired in series to provide a relatively light load, but allowing the output voltage to rise as high as 1440 volts (240 Volts X 6). While adjusting the rotor speed to provide about 500 Volts output, we have a small spark in the gap. We have been able to tickle the spark gap and keep a small arc going for several seconds at a time.

We will continue with testing for a max resonance point in the speed range of 200 Hz and above, and also with examining exciter coil effects on power output. We will provide results and analysis of testing in Part 2 of this update, in a few days.

We are very grateful to 3 of our UK guys who have provided a complete array of test equipment, delivered personally last night here in Morocco. This will be invaluable to us for ongoing development, and to publish readings and results.

(Also attaching the update word document here and the QEG Resonance Plot excel spreadsheet.)

Stay ‘tuned’ for more…
Much Love and Light!
Jamie

I cannot embed the doc here, but you can find it at this link:  http://be-do.com/index.php/en/forum/qeg-news/366-morocco-qeg-build-general-progress-update-part-1

The Contrast that isn't



I have talked many times before about the "contrast" that we have watched and experienced over the past eons.   The contrast of so called "light" and "dark" is the experience of separation and duality that we chose to experience to expand our experience of ONE.


There has been much discussion about this perception of contrast, and the perception of the difference between "light" and "dark", or "good" and "bad" in a huge amount of books, articles, radio shows and interviews, and channeled messages. We have talked about "good guys" and "bad guys", "good military" and "bad military",  "good aliens" and "bad aliens",  "angels" and "demons"... the list goes on and on, and always there seems to be that "contrast" between this group and that one.


It is very easy, it seems, to allow yourself the freedom to label someone else as something. It is seemingly easy to stand back and attach a stereotype or cliche label to someone you don't agree with.  It is also easy to express that that person needs to change, or that you want to help them change, or that change is necessary to move forward....  


And yet, maybe that contrast is being held up for a purpose?


Until just recently I would of been at the head of the line for thinking that way. Over the course of the past few weeks, I have been watching and thinking about the micro and macro of how so many interactions and different opinions and ideas and actions work together to form a play that gives the watchers and the players themselves the opportunity to really SEE and LISTEN and LOOK WITHIN.


We ARE ONE.  We are all equal, and all opinions and perceptions have equal value in the experience that we agreed to play our part in.  This IS the separation and duality that we are acting out.  Without differing opinions, perceptions, ideas, actions or intentions, there is nothing to experience, right?  How do we grow without having something new to think about or to learn from or to experience?  Even if you do not agree with an idea, action or an opinion, you still learn FROM that perception, even if only to decide that you do not agree with it.


Experiences are something that we experience to LEARN.  The trick is to SEE the learning experience when it is placed in front of you and to be able to SEE the mirror that is being held up for you to look into. I have talked a lot in the skype rooms about people holding up mirrors for each other, and that many times something that irks or irritates you about someone else is the very thing that you yourself are unconsciously dealing (or not dealing) with.  When we are in a situation or an experience that is uncomfortable or angering or sad, or even happy and joyous, it gives us an opportunity to look into that mirror  that is being held up and to SEE ourselves and what part we have played in that experience and to analyze our actions/reactions to it.  We can look at the whole or the parts and ask ourselves "Is this me? What part did I play in this?  Is this being played out for ME to learn something?  Why did I react this way?".  If it isn't you or your mirror to look into, then you can pass it on knowing that you did look into the mirror and that the message wasn't for you. 


There is an naked honesty that we need to have when we look within ourselves.  If you are not honest with yourself, then the same message will keep playing out in front of you, each message getting closer and closer together and stronger and more insistent to get you to listen. The perceived "Contrast" gets bigger and stronger till you have no choice but to really look at it.  I have found that the quicker I "get it" that the easier it is to absorb the lesson, and that delaying/denying the accountability of that lesson to myself quickly turns it into a cold icky dish that is difficult to choke back, lol.  It's kind of like the "Ow Hot!" lesson:  You can listen when mom tells you that the stove is hot and  not touch it, or you can not listen and learn the hard way "OW HOT!!!"- either way the lesson gets learned sooner or later.  How many blisters you have to endure to learn the lesson is up to you though.


ALL opinions have a value- regardless of whether you agree with it or not.  Contrast serves a very important purpose in all things that we DO.  It holds a mirror for us to look into and it also gives us clarity of our own perceptions, sometimes even serving to be a barometer for looking within at our actions/reactions.  Contrast also serves a purpose, or PURPOSE.  It is easy to judge or to label someone else's actions or words as negative, and yet perhaps those actions or words are actually there to create a positive effect!  Many things that we might perceive to be negative, may actually be something necessary to bring about a very positive experience.


Two nights ago I had a very vivid energetic experience that really pushed this point home.  In it I saw a series of events and situations reviewed, ones that I would have considered "negative" or "contrasting".  As each situation/person reviewed itself in front of me I was told very clearly "Everything IS PERFECT!  Allow it to play out as it is and it will be perfectly done, just as it was planned.  Do not intrude or meddle.... everything is flowing exactly as it is suppose to!".


I can and have looked into the mirror and know that one of my faults is that I am very much a controller and a fixer..... these messages were a good kick in the ass for me, to remind me that everything really IS perfect as it is and that sometimes we need to stand back and allow things to play out. Not out of apathy or disinterest, but in understanding that while we might not see it yet, things really ARE playing out perfectly and are perfectly done.


One of my favorite authors wrote: "Everything that happens, happens exactly as it should".


Lesson learned.


Remember this: We are ALL on the same team.  As a matter of fact, there are no teams!!!  There is just ONE.  The roles that each of us plays in this experience is only a role.  The reality is that there is NO CONTRAST!  There are no "good guys" or "bad guys", no "Light" or "Dark". There is only ONE. Our perceptions of duality and separation are just the experience that we chose to experience so that we can experience EVERYTHING. 


As the play comes to an end, all the actors come to the front of the stage to take a bow together as ONE.  When the makeup and the costumes are taken off, the actors are no longer the perceived "heroes" or "villains".... they are just friends sitting around after the show, having a drink and a bite to eat, laughing and enjoying themselves.  Congratulating each other for a job well done and thanking each other for playing such amazing roles with so much LOVE.


The Play of Duality is over.


Now it's time to kick back and love and laugh and just be ONE.

Wednesday 7 May 2014

Morocco QEG Update: DOing it differently this time


Huge thanx to Justin and Julian for keeping everyone up to date on the QEG development here in Aouchtam.   Below is the article they posted on Sunday (sorry for the delayed reposting.... I couldn't find my computer for a while, lol).

The Mass excitement of 70 people crammed into a workshop has calmed down muchly, and the work on the QEG has been progressing at a much more quiet pace. Quiet is very nice, let me tell you, lol!!!  I am not going to give any more information at this moment as to be quite frank, I haven't asked for an update in the past two days and have encouraged everyone to leave Jamie in peace to work without interruption, with a small group of supporters (including engineers, a physicist, a Nick, and a coffee maker (me) and many others) standing by to help with anything he needs.  As soon as I have news, I will post it- I promise.

The one comment I will make about this past week is this:  The QEG IS.  It doesn't need crystals, or incense, or mantras or Ohms, or female energy or male energy, or candles or flowers, or pan pipes or singing bowls.... the QEG IS as it IS. When people are working with the QEG it is their own resonance and frequencies that are interacting with it. We are Fuckin' Beacons of Light and don't need to be "tuned" or to "set our frequencies" or to "raise our frequencies" or to BE anything other than we already BE. We BE PERFECT. Just the same, the QEG IS what it BE.  This isn't about creating a new religious icon or alter- haven't we had enough of that already? 

"Insanity is doing the same thing, over and over again, but expecting different results." - Albert Einstein


Original article and more photos:
http://sitsshow.blogspot.com/2014/05/status-of-qeg-build-morocco-build-day-9.html


Side Note: The Exciter Coil and the spark gap box -amongst other things-were made by Nick. He also bakes cookies.... but I'm not suppose to tell anyone that.

Status of QEG Build Morocco: Build Day 9 - Additional Capacitors Arrive: Comments from an Engineer

Photos by Julian Robles
We had one of the independent engineers that was here for the build leave a comment on Status of QEG Build Morocco: Build Day 3 - Initial Resonance Achieved! (Video), with some updates about the QEG. This commentary is relevant to the build and we thought we would share it. Thanks for commenting!

A quick update on this "from the ground". I have been in Morocco building the QEG for the past 10 days, and arrived home yesterday.

I am an engineer and am independent of the QEG group. I went out to Morocco to be involved in the QEG build and to make independent 3rd party measurements. As suggested by Justin & Julian's comments, this video represents only the first step in truly testing the claims of the QEG - it was the first time it was turned on, and was completely un-tuned. We measured this un-tuned set-up using voltage/current probes on an oscilloscope and showed about 1000W power from the wall, and 350W across the load (in this case 3 x 100W bulbs), so a COP (co-efficiency of performance) of about 35%. This was a few days ago, and in this set-up we would not expect a COP greater than than 100% even when tuned because the circuit is not complete.




Getting readings on the oscilloscope

As of yesterday, the final parts arrived to tune the system (capacitors), and it will take a few days to complete that process. In addition to the set-up shown in this video, the 'exciter circuit' has been added, which Witts says is the important aspect for creating the over-unity effect. The tuning will attempt to match the LC tank resonance to the mechanical resonance of the core (around 400Hz). Then the exciter circuit will create a regular 1.3MHz pulse to "condition" the core and apparently allow over-unity to take place.




'exciter coil'
Should over-unity be measured, the final part of the plan is to extract some of the excess generated power on the output side and loop it back into the input (the variac & motor), meaning the mains cable can be unplugged. 

However, there is some work to do before this stage is reached. We have been spending a lot of time trying to understand the Witts work, and there are a few gaps in our knowledge that we are trying to figure out. I plan to go back out there in a few days to continue the assessment. The QEG team (Jamie, Val & Hope) are the most genuine, selfless and lovely people I have ever met. I would ask that you all have some patience with this. The right people are there to make this happen, just hold the space open to allow this to come about. 

- Mr. Jalapeno

The Capacitors have been in the QEG shop since build day 8, May 3rd, and the team has been at work since then preparing for the next round of testing. Stay tuned for more updates and as the Engineer suggested, hold the space of love and patience as we step forward into our collective future. 
- Justin and Julian
http://sitsshow.blogspot.com/2014/05/status-of-qeg-build-morocco-build-day-9.html